Older Potterton Boiler Repair London — Sirius, Statesman, Performa, Lynx

Older Potterton Boilers in London — Sirius, Statesman, Performa and Lynx

London’s social housing stock and older privately rented properties contain a significant number of older Potterton boilers that predate the Promax range. The Potterton Sirius, Statesman, Performa and Lynx models are heat only boilers that work with a separate hot water cylinder, rather than combi boilers. These systems are found in larger London properties and housing association blocks where the original system was designed for a cylinder based setup.

These boilers are now typically fifteen to thirty years old. Many are still running reliably when maintained. Others are reaching the point where major component failures make replacement the wiser choice. Your local Potterton specialist at 247 Plumber London will give you an honest assessment based on the age, condition and nature of the fault.

Older Potterton Models We Work On

The Potterton Sirius is a heat only boiler available in various outputs from 40,000 BTU to 100,000 BTU. It was widely installed in London’s larger family houses and housing association properties from the 1990s through to the early 2000s. The Potterton Statesman is a floor standing heat only boiler found in properties where the boiler was installed in a utility room or garage rather than on a wall. The Potterton Performa was an early combi boiler from Potterton that is now significantly aged. The Potterton Lynx was a wall hung heat only boiler common in smaller London properties before the combi boom.

Should You Repair or Replace an Older Potterton?

For older Potterton heat only boilers, the calculation is different from combi boilers of similar age. A well maintained Sirius or Statesman in good condition, with a serviceable cylinder, can run for many more years with appropriate maintenance. The heat exchanger on older cast iron Potterton boilers is significantly more durable than modern lightweight aluminium exchangers and does not suffer from the same hard water scaling problems.

However, when the boiler controls fail, when the gas valve needs replacing, or when the flue system needs significant work, the economics of repair versus a complete modern system replacement need to be considered carefully. A new combi boiler or a modern system boiler with an unvented cylinder will be significantly more efficient than a twenty five year old heat only system, and the energy savings contribute to the payback.

We will attend, assess the boiler honestly, and give you our genuine recommendation. If a straightforward repair extends useful life by several years at reasonable cost, we will say so. If the repair cost and remaining life expectancy make replacement the sensible choice, we will tell you that too.